Second-Generation UniFi Switching
We’ve redesigned our UniFi Switches from the ground up.
Near Silent Cooling
Our new airflow design reduces the need for fan usage.
Powerful Hardware and Software
UniFi Switches offer a variety of features, including 10G SFP+ ports, PoE+ or PoE++ support, and Layer 3* switching capabilities.
Redundant Power System
UniFi SmartPower RPS, USP-RPS, is our PSU failover system.
Power Supply Failure
In the event of a UniFi switch power supply failure, the USP-RPS automatically supplies redundant power to the failed device.
UniFi SmartPower
One UniFi SmartPower device can support up to 6 devices until the failed device is replaced.
Touchscreen Display
The 1.3" touchscreen display allows easy monitoring and quick troubleshooting.
Specifikacijos
| Vendor Homepage | https://switch.ui.com/gen2/ |
|---|---|
| Category Code | SWI |
| Unit Box Height | 0.38 |
| Unit Box Length | 0.51 |
| Unit Box Width | 0.125 |
| Switch type | Managed |
| Switch layer | L2/L3 |
| Quality of Service (QoS) support | Yes |
| Web-based management | Yes |
| System event log | Yes |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| SFP+ module slots quantity | 2 |
| Power connector | AC-in jack |
| Networking standards | IEEE 802.3af/IEEE 802.3at |
| 10G support | Yes |
| Port mirroring | Yes |
| Full duplex | Yes |
| Broadcast storm control | Yes |
| Flow control support | Yes |
| IPv4 routes | 64 |
| Link aggregation | Yes |
| Rate limiting | Yes |
| VLAN support | Yes |
| Number of VLANs | 1000 |
| Switching capacity | 88 Gbit/s |
| Throughput | 44000 Mpps |
| Forwarding rate | 65.472 Mpps |
| MAC address table | 16000 entries |
| Static route | Yes |
| Jumbo frames support | Yes |
| Packet buffer memory | 2 MB |
| DHCP features | DHCP relay/DHCP server/DHCP snooping |
| IGMP snooping | Yes |
| Authentication type | IEEE 802.1x,RADIUS |
| Rack mounting | Yes |
| Form factor | 1U |
| Product colour | Silver |
| Reset button | Yes |
| LED indicators | Activity/Link/PoE/Speed/System |
| Display type | LCM |
| Power source | AC |
| Power supply included | Yes |
| Redundant power supply (RPS) support | Yes |
| Number of power supply units | 1 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 450 W |
| Power over Ethernet (PoE) | Yes |
| Power over Ethernet plus (PoE+) ports quantity | 16 |
| Power over Ethernet 4PPoE (PoE++) ports quantity | 8 |
| Power over Ethernet (PoE) power per port | 64 W |
| Total Power over Ethernet (PoE) budget | 400 W |
| Operating temperature (T-T) | -5 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Width | 442.4 mm |
| Depth | 285.4 mm |
| Height | 43.7 mm |
| Weight | 4300 g |
| Certification | CE, FCC, IC |
| Harmonized System (HS) code | 85176990 |
| Unit Calculated Weight | 6.5 kg |
| Product Net Weight | 4.3 kg |
| Unit Calculated Volume | 0.03005 cubm |
| Units per Shipping Box | 2 |
| Shipping Box Weight | 13 kg |
| Unit Width | 12.5 cm |
| Shipping Box Height | 42 cm |
| Unit Depth | 51 cm |
| Shipping Box Depth | 53 cm |
| Unit Height | 38 cm |
| Shipping Box Width | 27 cm |
| Name | NET SWITCH 24PORT 1000M 2SFP/POE USW-PRO-24-POE UBIQUITI |
| Model name | USW-Pro-24-PoE |